968.net

The door handle was sticky and was tough to open when I got the car.  The inside latch always worked fine.

 

Now, the outside or inside handle wont open the door, and I noticed a red light on the console (which I believe operates the locks is on.

 

Any thoughts on what the problem might be and how to fix it?

 

Thanks in advance....

Views: 162

Reply to This

Replies to This Discussion

The best thing to do would be to remove the door panels and have a look. I think Clarks Garage has a how-to article about this.

 

http://www.clarks-garage.com/

 

Just checked. There are two How-tos. They are for the door handles and the door panels. These are for 944s, but they should work for the 968s.

 

Good luck.

Thanks Monte.  The problem is I can't open the door to remove the panel.

 

I appreciate the advice though and sure I'll be looking for more help.

 

 

 After getting the door open and the panel off, you will probably find a broken clip.   If you look on the parts catalog, it will help you understand how it goes together. Make sure you clean and lube everything while you are in there, including the window mechanism.
Thanks for the lead. I'll try it.

RSS

Support Our Ad Partners

© 2024   Created by Ray Starbird.   Powered by

Badges  |  Report an Issue  |  Terms of Service